Solar Panel Kit for Van Best Of – Motorhome Camper Caravan
Best Solar Panel Kit for Van
Calculate the total watt-hours (Wh) you’ll need daily to power devices like lights, refrigerators, laptops, and other
electronics. This will help you determine the size of the solar panel kit.Ensure the solar panels can generate enough power to meet your daily needs, considering that solar panels typically produce 20-30% less than their rated capacity due to inefficiencies.
Also L@@K for on a Solar Panel Kit for a Van
Now check out this 2kW System for a Van
Firstly this Solar Panel Kit for Van has been thoughtfully designed to maximise efficiency and output and therefore
comes equipped with some of our most premium quality products in the Eos Solar Solutions range.
This Solar Panel Kit for Van includes
2 x 160W fibreglass reinforced solar panels
30A solar charge controller
200Ah 12V battery
2000W 230V pure sine wave inverter
Connection Cables.
Secondly remember this Solar Panel Kit for Van is an easy install and is great for personal or commercial use. It can provide power to appliances such as a TV, radio, lights, computer, laptop, printer, fridge, or microwave.
But remember this may vary significantly according to location and season.
Van Solar Panel Kit includes:
- 2 x 160W black semi-flexible fibreglass solar panels each with durable ETFE coating and 2 x 1m solar cable
and T4 connectors - 30A 12V/24V solar charge controller with LCD display
- 2000W 230V pure sine wave inverter
- 200Ah Gel deep cycle leisure battery
- Automatic circuit breaker
- A pair of 5m 6mm² solar extension cables with T4 connectors
- 5m of 6mm² dual core battery extension cable with a 20A fuse
- A pair of T4 T-branch solar connectors
- A waterproof double entry cable gland
- Loose ring terminals
Spec and information on each product in the Solar Power Kit for a Van
2 x 160W black semi-flexible fibreglass solar panel with durable ETFE coating:
And remember the kit includes two high-efficiency, waterproof 160W black fiberglass-reinforced solar panels, featuring innovative 5-busbar solar cells for maximized efficiency and output. Each panel is equipped with two 1-meter lengths of 4mm² cable, terminating in T4 connectors for convenient connection to the included 5-meter solar
extension cable.
160w Solar panel specifications (per solar panel):
- Peak power: 160W
- Maximum power voltage: 20.5V
- Maximum power current: 7.81A
- Open circuit voltage: 24.0V
- Short circuit current: 8.20A
- Dimensions: 1380 x 665 x 2 mm
- Weight: 2.96 kg
Remember to check this
The panel boasts a durable construction, employing glass fiber-reinforced plastic for enhanced sturdiness. It also features a distinctive textured surface that significantly reduces light reflection, thereby improving its performance in conditions of low light and cloudiness.
The installation process is straightforward, requiring no drilling, and its highly flexible nature makes it perfect for curved roofs, pop tops, and other areas where a bonded, sleek, and contemporary finish is desired.
30A 12V/24V solar charge controller:
This controller has been 100% designed and produced in Italy by one of the leading European solar technology manufacturers, in accordance with the highest quality standards and includes a superior 5-year manufacturer warranty.
This solar charge controller uses PWM (Pulse Width Modulation) technology to improve charge acceptance and extend the life of your battery.
PWM technology can also recover some lost battery capacity. The controller features a LCD display which shows advanced system information including: power, voltage and
current for the solar panels and battery, energy counter, temperature, and load work.
30A 12V/24V solar charge controller specifications:
- Fully automated operation and auto 12V/24V selection
- Rated charging and load current: 30A
- Enhanced monitoring and charging / load work control
- Maximum solar panel input voltage 55V
- 3 pairs of terminals (input, battery, load) for wire up to 10mm2
- Temperature sensor: built in
- Full set of electronic protection functions
- Self-consumption: 8mA
- Working temperature: -10°C to +60°C
- Size: 15 x 12 x 5 cm
- Weight: 500 g
- Multiple mounting holes for ease of installation
This device is compatible with sealed, GEL, and flooded lead-acid batteries. It features pre-set charging programs for various battery types, and the low voltage protection can be customized to meet your needs. Additionally, the load working modes are programmable for a variety of applications, such as setting timers for lights, fans, or pumps.
2000W 230V pure sine wave inverter:
This 2000W 230V pure sine wave inverter converts battery output (DC, or direct current) into 230V AC mains electricity (alternating current). 230V AC is the type of electricity supplied by utility companies to run
standard domestic appliances such as a TV, fridge, radio, lights etc.
2000W 230V pure sine wave inverter specifications:
- Input: 12V (10-15V) DC
- Output: 220-240V AC
- Output frequency: 50 Hz
- Output waveform: pure sine wave
- THD: < 3%
- Continuous power: 2000W
- Surge power: 4000W
- Peak efficiency: 90%
- Low battery shut down: 10.0V +/- 0.5V DC
- Low battery alarm: 10.5V +/- 0.5V DC
- High voltage shut down: 15.5V +/- 0.5V DC
- Thermal shut down: 60 +/-5°C
- Rated USB output: 2A
- Wireless remote control radius: Approx. 50m
- Size (inc. terminals): 390 x 220 x 95 mm
- Weight: 5.0 kg
This is a Pure Sine Wave type of inverter, which means that the 230V AC output harmonically follows a smooth sine wave and is almost identical to normal mains electricity. Pure sine wave output is far superior than square sine wave or modified sine wave output for running appliances.
More
To begin with, the Gel battery offers a significantly longer service life compared to standard wet-cell batteries. This is primarily due to reduced internal degradation and corrosion, which allows it to maintain optimal performance over time.
Additionally, the battery excels in holding a charge, even during extended periods of non-use, thanks to its much lower self-discharge rate. As a result, the Gel battery proves to be more reliable and efficient, particularly in applications where consistent, long-term energy storage is essential.
In addition to these features, the inverter is equipped with a USB port for powering devices like mobile phones, tablets, laptops, and MP3 players. Furthermore, it includes a wireless remote control that allows users to conveniently turn the device on and off from a distance of up to 50 meters.
200Ah Gel deep cycle leisure battery:
The Gel deep-cycle battery is non-spillable, completely sealed, and maintenance free – amongst the very safest batteries you can find.

Gel Battery specifications:
- Nominal voltage: 12V
- Nominal capacity: 200Ah (10h rate) / 205Ah (20h rate)
- Maximum charging current: 40A
- Self-discharging rate: <1% per month
- Cycle lifetime at 30% D.O.D.: 1200-1300
- Pressure control: safety valve installed
- Terminal type: F24 (bolts and washers included)
- Operating temperature: from -10°C to +50°C
- Size: 523 x 239 x 243 mm
- Weight: 61.5 kg
Additional items:
This kit also includes
5m 6mm² dual core battery extension cable with a 20A fuse and loose ring terminals for connecting the
charge controller to the battery
Automatic circuit breaker for use between the inverter and the batteries
5m 6mm² solar extension cable with T4 connectors and double cable entry gland to connect to the existing 1m of solar cable fitted to the solar panel to the charge controller through the roof of the van.
Solar panel specifications (per solar panel):
- Peak power: 160W
- Maximum power voltage: 20.5V
- Maximum power current: 7.81A
- Open circuit voltage: 24.0V
- Short circuit current: 8.20A
- Dimensions: 1380 x 665 x 2 mm
- Weight: 2.96 kg
30A 12V/24V solar charge controller specifications:
- Fully automated operation and auto 12V/24V selection
- Rated charging and load current: 30A
- Enhanced monitoring and charging / load work control
- Maximum solar panel input voltage 55V
- 3 pairs of terminals (input, battery, load) for wire up to 10mm2
- Temperature sensor: built in
- Full set of electronic protection functions
- Self-consumption: 8mA
- Working temperature: -10°C to +60°C
- Size: 15 x 12 x 5 cm
- Weight: 500 g
- Multiple mounting holes for ease of installation
- Also Checlout our dedicated Van Life Van Solar Panel Kit page
More Information
2000W 230V pure sine wave inverter specifications:
- Input: 12V (10-15V) DC
- Output: 220-240V AC
- Output frequency: 50 Hz
- Output waveform: pure sine wave
- THD: < 3%
- Continuous power: 2000W
- Surge power: 4000W
- Peak efficiency: 90%
- Low battery shut down: 10.0V +/- 0.5V DC
- Low battery alarm: 10.5V +/- 0.5V DC
- High voltage shut down: 15.5V +/- 0.5V DC
- Thermal shut down: 60 +/-5°C
- Rated USB output: 2A
- Wireless remote control radius: Approx. 50m
- Size (inc. terminals): 390 x 220 x 95 mm
- Weight: 5.0 kg
Battery specifications:
- Nominal voltage: 12V
- Nominal capacity: 200Ah (10h rate) / 205Ah (20h rate)
- Maximum charging current: 40A
- Self-discharging rate: <1% per month
- Cycle lifetime at 30% D.O.D.: 1200-1300
- Pressure control: safety valve installed
- Terminal type: F24 (bolts and washers included)
- Operating temperature: from -10°C to +50°C
- Size: 523 x 239 x 243 mm
- Weight: 61.5 kg
2kW complete van conversion kit with 2 x 160W black semi-flexible solar panel, 200Ah 12V battery and 2000W 230V pure sine wave inverter
https://www.eossolarsolutions.co.uk/product/solar-panel-kit-for-van/
Also Checlout our dedicated Van Life Van Solar Panel Kit page
Check out some other Items
