10amp 75/10 SCC010010050R BlueSolar Victron MPPT

MPPT 10amp Victron 75/10 Charge Controller BlueSolar

Victron 75V 10A MPPT controller comes from the intelligent BlueSolar range which uses the latest ultrafast MPPT technology. This maximises energy harvest whilst maintaining optimal battery health. The advantage of the BlueSolar 10amp MPPT charge controllers is to uniquely boast its intelligent battery life function. Also along with its advanced communication options for remote system monitoring.

Specifications Victron 75/10

• BlueSolar Charge Controller MPPT 75/10
• Battery voltage (auto select) 12/24V
• Rated charge current 10A
• Nominal PV power, 12V 1a,b) 145W
• Nominal PV power, 24V 1a,b) 290W
• Max. PV short circuit current 2) 13A
• Automatic load disconnect Yes
• Max. PV open circuit voltage 75V 100V
• Peak efficiency 98%
• Self-consumption 12V: 25 mA 24V: 15 mA
• Charge voltage ‘absorption’ 14,4V / 28,8V (adjustable)
• Charge voltage ‘float’ 13,8V / 27,6V (adjustable)
• Charge algorithm multi-stage adaptive
• Temperature compensation -16 mV / °C resp. -32 mV / °C
• Max. continuous load current 15A
• Low voltage load disconnect 11,1V / 22,2V / 44,4V or 11,8V / 23,6V / 47,2V or Battery Life algorithm
• Low voltage load reconnect 13,1V / 26,2V / 52,4V or 14V / 28V / 56V or Battery Life algorithm
• Protection Output short circuit / Over temperature
• Operating temperature -30 to +60°C (full rated output up to 40°C)
• Humidity 95%, non-condensing
• Data communication port VE.Direct

Inbuilt safety protection:

Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, and battery overheating

This is all monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signaled via the high intensity LED indicators.

Intelligent ‘BatteryLife’ function

To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads.

Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis.

Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).

Optional Advanced programming and monitoring:

The user can connect an optional MPPT Control panel to the controller to access a range of monitoring and programming functions. The display shows charging parameters, voltage, current and power for the solar panel, battery and load, as well as 30 day performance data.

The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.

Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system.

Once the controller is paired with the app, a wide range of additional features are made available, including:

Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery), battery state of charge, load status and consumption.

And More 

Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary.

These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.

User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.

Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.

The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.

More Features on this Victron MPPT

The Victron 75/10 SCC010010050R BlueSolar MPPT 75-10 model is

ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components.

This Victron 75/10 SCC010010050R solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries (requires Bluetooth dongle or USB interface cable to adjust battery type).

Specifications Victron 75/10

• BlueSolar Charge Controller MPPT 75/10
• Battery voltage (auto select) 12/24V
• Rated charge current 10A
• Nominal PV power, 12V 1a,b) 145W
• Nominal PV power, 24V 1a,b) 290W
• Max. PV short circuit current 2) 13A
• Automatic load disconnect Yes
• Max. PV open circuit voltage 75V 100V
• Peak efficiency 98%
• Self-consumption 12V: 25 mA 24V: 15 mA
• Charge voltage ‘absorption’ 14,4V / 28,8V (adjustable)
• Charge voltage ‘float’ 13,8V / 27,6V (adjustable)
• Charge algorithm multi-stage adaptive
• Temperature compensation -16 mV / °C resp. -32 mV / °C
• Max. continuous load current 15A
• Low voltage load disconnect 11,1V / 22,2V / 44,4V or 11,8V / 23,6V / 47,2V or Battery Life algorithm
• Low voltage load reconnect 13,1V / 26,2V / 52,4V or 14V / 28V / 56V or Battery Life algorithm
• Protection Output short circuit / Over temperature
• Operating temperature -30 to +60°C (full rated output up to 40°C)
• Humidity 95%, non-condensing
• Data communication port VE.Direct

Enclosure

• Colour Blue (RAL 5012)
• Power terminals 6 mm² / AWG10
• Protection category IP43 (electronic components), IP22 (connection area)
• Weight 0,5 kg
• Dimensions (h x w x d) 100 x 113 x 40 mm

Standards

• Safety EN/IEC 62109-1, UL 1741, CSA C22.2

Downloads

BlueSolar and SmartSolar Overview Datasheet

This product is covered by a 5 year warranty.

Features of the Victron Bluesolar MPPT 75/10:

Ultra-fast Maximum Power Point Tracking (MPPT) technology continuously monitors the voltage and current output of your solar panels. This ensures that all available power is extracted from your panels and stored efficiently.

In suboptimal conditions, such as overcast or cloudy skies with constantly changing light intensity, an ultra-fast MPPT controller can increase energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

BatteryLife: Intelligent Battery Management
When a solar charge controller cannot fully recharge a battery within a day, the battery often cycles between a “partially charged” state and the “end of discharge” state. This operation mode, lacking regular full recharges, can ruin a lead-acid battery in months or even weeks.

Victron’s Battery Life algorithm tracks the battery’s state of charge and gradually increases the load disconnect level daily until the absorption voltage is attained. This load disconnect level is adjusted to ensure that the absorption voltage is achieved approximately once every week thereafter.

Firstly, Victron Energy is a global leader in power solutions for off-grid and mobile applications. Moreover, they specialise in solar, battery, and inverter systems. In addition, their products are trusted for reliability and cutting-edge performance.

Secondly, Victron offers a wide range of smart energy products for marine, automotive, and industrial use. Furthermore, their equipment integrates seamlessly for custom power setups. Notably, Bluetooth and app connectivity come as standard in many devices.

Finally, Victron is known for innovation, durability, and outstanding support. Consequently, professionals and enthusiasts choose Victron for dependable energy management. Ultimately, it’s a brand built for power confidence.

15 Reasons you should use a Victrion MPPT Charge Controller

1. Firstly, Victron MPPT Charge Controllers maximise solar energy harvest for better efficiency and faster charging.
2. Secondly, they track the maximum power point with precision, even in partial shade or cloudy conditions.
3. Moreover, Victron MPPT Charge Controllers work flawlessly with 12V, 24V, and 48V battery systems.
4. Additionally, they are compatible with lithium, AGM, gel, and lead-acid batteries.
5. Importantly, Victron MPPT Charge Controllers reduce energy loss and increase system performance.
6. Notably, these controllers offer up to 30% more charging power than PWM charge controllers.
7. In comparison, cheaper brands lack the advanced tracking and build quality of Victron MPPT Charge Controllers.
8. Furthermore, they come with built-in Bluetooth for app-based monitoring and real-time data.
9. Consequently, users can optimise their solar setups from anywhere using the VictronConnect app.
10. Equally, Victron MPPT Charge Controllers help extend battery life through smart charging algorithms.
11. Therefore, they are ideal for off-grid, campervan, marine, and home solar systems.
12. Undoubtedly, Victron’s global reputation ensures quality, reliability, and long-term performance.
13. Also, these controllers feature intelligent load output for system automation and protection.
14. Hence, Victron MPPT Charge Controllers deliver unmatched efficiency in any solar installation.
15. Finally, they are trusted by professionals and DIY installers for their accuracy, durability, and ease of use.