Victron Energy Lynx Power In M8 LYN020102000 Off Grid

Lynx Power In M8 by Victron LYN020102000

This is the M8 

LYN020102000

The Victron Energy Lynx LYN020102000 Power In contains a positive and negative busbar with 4 connections for batteries, loads or chargers and a ground connection.
It is part of the Lynx Distribution system and is available in two versions, with M8 or M10 busbar.
Note that M10 refers to the busbar connection joints where the modules are connected to each other. The fuse and cable connections are always M8.

Victron Energy Lynx LYN020102000 Unlike the Victron Lynx Distributor and the Lynx Power In it does not have built-in designated spaces for the fuses. This means that all connected loads, chargers or batteries would need thier own fuse. They would need to have an appropriate fault current interruption rating.

Depending on the desired design you can have multiple Victron Lynx Power In modules connected together in series to create much longer busbar with more connections for batteries and other items.

Alternatively, a single Lynx Power In unit can be used by itself or in combination with other Lynx distribution system modules as below

Lynx Power In M8
Lynx Power In M10
Lynx Distributor M8
Lynx Distributor M10
Lynx Shunt VE. Can M8
Lynx BMS 500 M8

LYN020102000

8719076022589

Victron Energy Lynx LYN020102000

Check Out the Full Victron Energy Range, start with Victron Solar Panels

Full Range   Lynx Distributor    BlueSolar Charge Controller SmartSolar Charge Controller   Battery Charger IP22  Battery Charger IP67   Victron Multiplus II    Victron  Accessories  Victron Orion 

BlueSmart

Victron Phoenix 

Victron Orion XS      victron blue smart charger 24v    Victron Van Solar Panel Kit 370w  Victron Solar Panel Kit 370w