Lynx Power In M10 by Victron
This is the M10
“Delivery with 10 Days from Holland”
The Lynx Power In contains a positive and negative busbar with 4 connections for batteries, loads or chargers and a ground connection.
It is part of the Lynx Distribution system and is available in two versions, with M8 or M10 busbar.
Note that M10 refers to the busbar connection joints where the modules are connected to each other. The fuse and cable connections are always M8.
Unlike the Victron Lynx Distributor and the Lynx Power In it does not have built-in designated spaces for the fuses. This means that all connected loads, chargers or batteries would need thier own fuse. They would need to have an appropriate fault current interruption rating.
Depending on the desired design you can have multiple Victron Lynx Power In modules connected together in series to create much longer busbar with more connections for batteries and other items.
Alternatively, a single Lynx Power In unit can be used by itself or in combination with other Lynx distribution system modules as below