30a 100/30 SmartSolar SCC110030210 Victron MPPT

Victron Smart Solar – 30 amp MPPT 100/30 Bluetooth – SCC110030210

30amp MPPT Charge Controller – SCC110030210 This Victron MPPT 100 30 Charge Controller is a great option,  MPPT 100 30 Victron Energy

This 100/30 Victron Smartsolar SCC110030210 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is why it is called MPPT. This is achieved through the use of high speed Maximum Power Point Tracking technology.

This tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. Constantly tracking and constantly charging at its best,

This technology enables the controller to produce up to 30% greater energy yield than the alternative PWM controllers and as much as 10% more power than slower MPPT controllers. This unique advanced technology allows the controller to perform extremely well in low-light or cloudy conditions. This makes them ideal for the UK. The controller consistently strives to extract the maximum available power from the solar array.

Inbuilt safety protection:

Fully equipped with an extensive range of safety features, this MPPT Charge Controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating – monitored via the internal temperature sensor.
The controller also has advanced self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are shown via the high intensity LED indicators. That amke this Victron MPPT 100 30 Charge Controller a Great Option

Intelligent ‘BatteryLife’ function:

To prevent complete discharge of the battery and avoid potentially permanent damage, this MPPT 100 30 Victron Energy controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads.

Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis.

Alternatively, this MPPT 100 30 Victron Energy can take the the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).

Read more features of this Victron MPPT 100 30 Charge Controller

Inbuilt Bluetooth:

This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App This means no additional Bluetooth dongle required.

This is a saving over other MPPT Charge Controllers. The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:

Firstly – Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.

Secondly – Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current as well as battery state of charge.

Thirdly – Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.

The VictronConnect App is also available to download as a PC version, for computers without Bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.

Optional Remote LCD Display:

The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.

Other features:

The Victron 100/30 Victron Smartsolar SCC110030210 MPPT 100-30 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.

This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.

Specifications:

– The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system
– Fully automated operation and auto 12 / 24V selection

– Inbuilt Bluetooth
– Comprehensive electronic protection features
– Communication port: RS232 / TTL for VE Direct accessories
– IEC/EN certified
– Enclosure: IP43 (electronic components) / IP22 (connection area)
– Pollution Degree rating: PD3

Specification: 100/30 Victron Smartsolar SCC110030210

Type: MPPT 100/30
Nominal Battery Voltages (Vdc): 12/24/V Auto Select
Max. Battery Current (A): 30
Peak Efficiency: 98%
Max. PV Open Circuit Voltage (V): 100
Remote Temp. Compensation: No
IP Rating IP43 (electronic components), IP22 (connection area)
Dimensions (h x w x d) 130 x 186 x 70 (mm)
Weight (Kg) 1.3
Victron MPPT 100 30 Charge Controller

Downloads & Technical Sheets

See the Full Victron Range

SmartSolar Charge Controllers Overview Sheet

SmartSolar Charge Controller Load Output Data

Check out alternative BlueSolar Charge Controllers 

• Firstly, Victron Energy was founded in 1975 and is headquartered in the Netherlands.
• Notably, the company specializes in power solutions, including inverters, chargers, and solar energy equipment.
• Additionally, Victron Energy products are designed for both off-grid and grid-tie applications.
• Furthermore, they are known for high-quality, durable products that perform in demanding conditions.
• Importantly, Victron’s equipment is widely used in marine, automotive, and industrial settings.
• Moreover, they offer a powerful monitoring system, the Victron VRM Portal, for remote energy management.
• Interestingly, Victron Energy’s products are Bluetooth-enabled, allowing easy access and configuration via the VictronConnect app.
• In fact, their equipment supports both lead-acid and lithium battery types, giving users flexibility in battery choice.
• Significantly, Victron products are known for their long lifespan and robust build quality.
• Finally, Victron Energy has a global distribution network, making their products accessible worldwide.

Compliment your solar system with Our AGM Battery Range

107ah 12v
160ah 12v
278ah 12v
300ah 12v
500ah 12v
300ah 24v
500ah 24v
500ah 24v Mounted in a trolly