Rutland FM910-4 24v Furlmatic Windcharger by Marlec

FM910-4 Rutland Furlmtic Wndcharger 24v

Specially designed Land, Small Off Grid Projects, Street Lights, Static Caravans.
Great all round Static Land Wind Charger

This is the24v Model

Rutland FM910-4 Windcharger – Rutland FM910-4 Windcharger are without doubt one of the most unique and versatile battery chargers in use throughout the world. The Rutland FM910-4 combines our proven furling tail system and latest 3 phase generator technology with a new aerodynamically shaped body style. This combination of the established and the modern means that our customers can be sure of great power performance and reliability over many years service. Primarily designed for land based applications, the Rutland Furlmatic has been used worldwide to provide year round power generation. Check out this Rutland FM910-4 Windcharger

Efficient power conversion

Rutland Windchargers generate greater ampere hours in real wind conditions than turbines of equal and often larger diameter! This is because our unique high inertia alternator designs maintain momentum between gusts unlike other designs that stall and have to rebuild up speed. This Rutland “flywheel” action results in more free power generated into your battery

Rutland Windchargers are the lowest cost per watt of power generated owing to our many in-house manufacturing efficiencies and volume of production for our worldwide customers

More ampere hours are generated because of the Rutlands’ low wind speeds start up (of just 2.6 m/s) so power is being generated in the most typical wind speeds as well as being powerful in the strong winds

Automatic ‘furling’ tail fin directs turbine out of wind above 16 m/s for gale protection

The low friction 3 phase alternators give a smooth and silent output

Computer designed efficient aerofoil blades. The fine profile blades have a positive one-way-only fit that have been tested to withstand a loading with a safety factor 10 times the turbine’s maximum rpm.

EEC directive 89/336/EEC compliance ensures no radiated interference

Automatic thermostat protection in prolonged gales

Modern, durable materials for excellent reliability and product longevity,

Charge Controllers
All Wind Turbines need to have Battery Management, if you do not put a controller on it the results can be a little out of control… Check out the Rutland Controllers.

HRDi – Duel Battery & and controlls Wind and Solar 

HRSi – Single Battery and Wind 

Remote Display for the HRDi Only

Rutland wind turbines are desiged and built using a range of modern and traditional high quality materials which are designed to endure in a marine environment. We have innovated in our field by introducing light weight but robust high density nylon and glass reinforced materials that are UV stable alongside marine grade aluminium, stainless steel, sealed for life bearings and other carefully selected and precision worked materials in a UK factory.

Accessories for Up and Running

MOUNTING POLE Mounting pole for land based systems – the FM910-4 can be installed on land using a 6m length of 48mm outside diameter tube with 41 mm internal diameter. The mounting pole can be fixed into the ground or on pivot type base for simpler raising and lowering. A minimum height of 6m and of 4 guy wires is recommended. More details are given in the installation manual. A Land Tower and Rigging kit is available from Marlec. VOLTAGE CONTROLLER Choose from our two Pulse Width Modulation charge regulators. Both models progressively slow down the turbine when the batteries become full thus reducing long term wear and tear to the turbine. Note that voltage regulators should always be sited < 1.5m of the battery to minimise voltage losses, ensuring accuracy of regulation.