No products in the cart.
PWM Charge Controller 30amp by PowMr M-Series
30amp PWM Charge Controller with MPPT features.
12V or 24V so is ideal if you plan to extend your project.
PowMr are a leading manufacturer of solar solution and offer value for money and with forward thinking technology.
This is a compatible MPPT charge controller with PWM intelligent / efficient / energy saving features.
It not only has efficient MPPT controller charging function but is all so able to automatically track the maximum power point.
This makes it 10% -30% higher on the efficiency rating than the ordinary controller.
It has standby energy saving of more than 30% when tested side by side with an ordinary charge controllers.
Finally it has a standby power consumption of only 10mA-15mA.
It not only has efficient MPPT controller charging function but is all so able to automatically track the maximum power point.
This makes it 10% -30% higher on the efficiency rating than the ordinary controller.
It has standby energy saving of more than 30% when tested side by side with an ordinary charge controllers.
Finally it has a standby power consumption of only 10mA-15mA.
Key Features 20amp PWM Charge Controller
10% -30% higher than the ordinary controller charging efficiency
LCD screen display all the charging data
Easy operation interface
Fully 3-stage PWM charge management
Parameter user can reset
A key to open and close the load
A key to restore the factory settings
USB-5V/0.5A for out put charging
The standby power consumption of only 10mA-15mA
Automatic temperature compensation function
Temperature probe/antenna
LCD screen display all the charging data
Easy operation interface
Fully 3-stage PWM charge management
Parameter user can reset
A key to open and close the load
A key to restore the factory settings
USB-5V/0.5A for out put charging
The standby power consumption of only 10mA-15mA
Automatic temperature compensation function
Temperature probe/antenna
| Parameters / Model | PWM10 | PWM20 | PWM30 | PWM40 |
| Maximum power current | 12A | 20A | 30A | 40A |
| Installation Lin(mm2) | 4mm2 | 8mm2 | 10mm2 | 12mm2 |
| Installation Line(AWG) | 10(AWG) | 8(AWG) | 7(AWG) | 6(AWG) |
| Weight | 280g | 300g | 475g | 480 |
| Dimensions | 143×89×46(mm) | 187*97*61(mm) | ||
| System load loss | ≤13mA | |||
| Loop Buck | ≤100mV | |||
| Battery float voltage | 13.8V(12V system)/27.6V(24V system) |
| Battery (under voltage) protection | 10.6V(12V system)/21.2V(24V system) |
| Battery (under voltage) recovery voltage | 12.6V(12V system)/25.2V(24V system) |
| Charge mode | MPPT+PWM MODE |
Operating Temperature | -10℃~60℃ |
| Storage Temperature | -30℃~70℃ |
| Humidity requirements | ≤90%, No condensation |
| Temperature compensation | -4mV/Cell/℃ |
| Temperature Probe (built components) | NTC 100K thermistats |
| Maximum open circuit voltage of the solar panel | 18V-24V(12V system)36V-48V(24V system) |
| Solar panels maximum open circuit voltage (V) | ≤48V |
(Cases) 12V system standard configuration (only applicable to our solar charge controller)
| The peak voltage of the solar cell panel(Maximum power voltage (V))) | 18V-25V | 18V-25V | 18V-25V | 18V-25V |
| Peak power of solar cell panel(Maximum power (Wp) | 50W-130W | 100W-260W | 200W-380W | ≤500W |
| Solar Charge Controller Model | PWM/MPPT10 | PWM/MPPT20 | PWM/MPPT30 | PWM/MPPT40 |
| Battery standard voltage | 12V | 12V | 12V | 12V |
| Battery capacity configuration | ≥100AH | ≥200AH | ≥300AH | ≥400AH |
| Installation Lin(mm2) | 4mm2 | 8mm2 | 10mm2 | 12mm2 |
| Installation Line(AWG) | 10(AWG) | 8(AWG) | 7(AWG) | 6(AWG) |
Read more about the future and the United Nations
Related products
Solar Panels 101w to 250w
£299.99
Charge Controllers
£125.00
30amp Charge Controllers
£195.00
Victron Accessories
£28.00
Solar Panels 101w to 250w
£199.99
Victron Accessories
£17.99
Charge Controllers
£88.00
Charge Controllers
£77.00