EPever Solar Panel Kit 100w Solar 10a MPPT Charge Controller and Brackets

Solar Panel Kit 100w Solar 10a EPever MPPT Charge Controller and ABS Brackets

EPever Solar Charger Panel Kit 100w

This kit comes with an MPPT EPever Charge Controller 

Other similar kits come with the cheaper PWM  – Be sure to check 

It also comes with 7 Part ABS Brackets in Black

100w Monocrystalline Solar Panel – 5-Busbar 

Advanced technology enables high output in this monocrystalline solar panel, which utilises innovative 5-busbar solar cells. These are more efficient than the 2, 3, or 4-busbar solar cells used in other solar panels, allowing more power extraction from the same surface area. Consequently, this leads to a smaller solar panel size for the same power rating.

Think of Busbars as lanes of traffic, more lanes are more traffic, so more power efficiency.

Every solar panel undergoes rigorous testing to meet the highest quality standards and is assigned a unique serial number for enhanced quality assurance and extended warranty coverage.

The panel includes a remarkable 5 meters of specialized PV Solar Cable designed to function at elevated roof temperatures with minimal power losses.

It comes equipped with a pair of male and female MC4 connectors, already crimped for immediate use at the cable’s end, facilitating effortless connections to additional solar panels or a Charge Controller.

Additionally, the MC4 connectors can be removed if necessary when connecting to the screw terminals of a solar charge controller.

100w Solar panel specifications:

• Peak power: 100W
• Maximum power voltage: 19.3V
• Maximum power current: 5.18A
• Open circuit voltage: 22.9V
• Short circuit current: 5.56A
• Power allowance range: 0~+3%
• Dimensions: 1200 x 540 x 35 mm
• Weight: 8.5 kg
• 4 mounting holes
• 2 x 5m of high quality single core solar cable (4.0mm² cross section) with MC4 connectors attached
• 100 Watt Monocrystalline Solar Panel

EPEVER 10a XTRA 12v/24v MPPT Charge Controller

Epever XTRA 1206N – 60VOC PV – LCD Meter New XTRA series – 3rd Generation MPPT

No Fan for silent operation, great for vans, boats or any live in spaces

With built in LCD advanced display and programming screen (XDS2)

New XTRA series has Lithium battery support (set via PC cable only)

​The XTRA tracer models have a current limiting function, you can connect 1.5 times the rated power to the controller ​so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don’t risk overloading the controller in the summer.  The output will be limited to the max listed above.

New EPEver (Tracer) series is EPsolar’s third generation of MPPT controller.

XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off grid photovoltaic systems, with display unit.

To maximize energy harvest from photovoltaic (PV) arrays and minimize power loss across various operating conditions, the XTRA series utilizes an advanced smart algorithm.

This results in up to 30% more efficient charging than traditional pulse width modulation (PWM) charge controllers. The XTRA series controllers feature a limit protection function for charging current and power. As well it has automatic power derating operation at high temperatures. These protections guarantee system stability. So even when the rated PV power is exceeded or in over-temperature conditions.

Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under different application requirements.

XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which effectively prolongs the lifespan of battery. This significantly improve the system performance. It also has extensive electronic protection for overcharge. As well as over discharge, PV&battery reverse polarity and et.

This is to ensure the sustainability and durability of the off grid solar system.

MPPT Controller Features:

• Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed
• Maximum DC/DC transfer efficiency is as high as 98%, full load transfer efficiency is up to 97.4%
• Wide MPP operating voltage range
• Low temperature protection and self activate function for lithium battery charging
• Limit charging power & current over rated range
• Real-time energy statistics function
• Multiple load work modes
• Comprehensive electronic protection
• Compatible with lead acid and lithium-ion¹ batteries
• Over temperature protection and power degrading in higher temperature
• Optional LCD display units (XDB1/XDS1/XDS2) and accessories
• High quality and low failure rate components of ST or IR to ensure service life
• Isolated RS485 communication port with 5V/200mA protected output, with standard Modbus protocol Monitor and set the parameters via APP or PC software
• Dustproof and waterproof design with IP32² protection class
• CE certification(LVD IEC62109,EMC EN3/1-6-61000)

Seven piece solar panel mounting kit in black ABS.

The set comprises six brackets (four for corners and two for sides) along with a cable entry gland.

These mounts are perfect for attaching our solar panels to vehicles, caravans, boats, barges, or even outbuildings and sheds, offering a robust, secure, and visually appealing method of installation.

The mounts will hold the solar panel 25mm above the surface, allowing for airflow beneath, which helps to keep it cool and ensures that the solar panel operates at its optimal efficiency..

Actual Design May Vary do to stock

EPever Solar Charger Panel Kit 100w

Our range of EPEVER products you must check out