555w JA Solar Monocrystalline PERC Half-Cell GR MC4

JA Solar 555W Monocrystalline PERC Half-Cell PERC 

JAM72S-30-555-GR-F30-EVO2 + JAM72S30550/GR

555w JA Solar PERC Mono Solar Panel

• Rating: 555W
• Efficiency: 21.5%
• Width: 1,134mm
• Height: 2,278mm THIS IS A BIG PANEL

555w JA Solar PERC – AM72S30 is the latest in JA Solar’s 72-cell range. This module with its 11-bus-bar half-cell configuration can reach a peak power output of 550W. This module offers better temperature-dependent performance and enhanced tolerance for mechanical loading. More benefits of this module range include:

• Higher power output
• Less shading
• Lower resistive losses
• Lower LCOE (Levelized Cost of Energy)

The frame thickness for this module has been improved from 35mm to 30mm.

This module is equipped with Staubli MC4-EVO2A connectors.

The panel has a design life of 25 years and a 12-year warranty period.

JA SOLAR

Modules must be mounted on appropriate mounting structures positioned on suitable buildings, the ground, or other structures suitable for modules (e.g. carports, building facades or PV trackers).
Modules must not be installed in locations where they could be submerged in water.
The recommended ambient temperature should be within -40°C(-40° F) to 40°C(104° F).The temperature limits are defined as the monthly average high and low of the installation site. The limit operating temperature should be-40°C (-40° F) and 85°C (185° F).
Ensure Modules are not subject to wind or snow loads exceeding the maximum permissible loads.
The Modules should be installed in a location where there’s no shading throughout the year. Ensure there’s no obstacle to block light near the installation site.

Lightning protection is recommended for PV systems that are to be installed in locations with high probability of lightning strikes. Do not use Modules near equipment or in locations where flammable gasses may be generated or collected.