JA Solar 405W Monocrystalline MBB Half-Cell MBB All Black
405w JA Solar MBB Mono Solar Panel
- Rating: 405W
- Efficiency: 20.7%
- Width: 1,134mm
- Height: 1,722mm
JA Solar Large Wafer PERC Multi-Busbar Half-Cell All Black Module
The half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.
- High output power
- Less shading effect
- Lower temperature coefficient
- Better mechanical loading tolerance
- Efficiency of 20%
Comes supplied with Staubli MC4 connectors and 1200mm output cables.
JA Solar Modules are intended for use in terrestrial applications only-no outer space use. Do not use mirrors or other magnifiers to concentrate sunlight onto the modules.
Modules must be mounted on appropriate mounting structures positioned on suitable buildings, the ground, or other structures suitable for modules (e.g. carports, building facades or PV trackers).
Modules must not be installed in locations where they could be submerged in water.
The recommended ambient temperature should be within -40°C(-40° F) to 40°C(104° F).The temperature limits are defined as the monthly average high and low of the installation site. The limit operating temperature should be-40°C (-40° F) and 85°C (185° F).
Ensure Modules are not subject to wind or snow loads exceeding the maximum permissible loads.
The Modules should be installed in a location where there’s no shading throughout the year. Ensure there’s no obstacle to block light near the installation site.
Lightning protection is recommended for PV systems that are to be installed in locations with high probability of lightning strikes. Do not use Modules near equipment or in locations where flammable gasses may be generated or collected.
Check out the data downloads on the catalogue tab
Take a look at the full range of JA Solar Panels we have.