Monocrystalline 250w Solar Panel Kit, Brackets and Cable
We call this the GLS Range – Ideal for Caravan, Motorhome, Shed and Day Van
250w Monocrystalline Solar Solar Panel 5BBar – 139cm x 99cm x 4cm
30Amp Charge Controller – PowMr – M Series
Panel Extension Cable – 5m Long with MC4 Connectors
7 Part Mounting Kit
Here at Eos Solar Solutions we have put together some Solar System Kits to help you select the right combination and also save you some money. This kit comes with the M Series PowMr Charge Controller. A PWM Controller with MPPT benefits.
250w Solar Panel Monocrystalline 5BBar
Firstly, this 250w solar panel has high efficiency when tested side by side with a polycrystalline solar panel. This makes It is ideal for both permanent and mobile use. This could be in your workshop, man cave or camper van. It is also good for a full off grid system. Check out the 250w monocrystalline solar panel and also the 100w and the 60w solar panel
Secondly, because the panel is fitted with generous 5m of special solar cable it can work at high roof temperatures with very minimum power losses. Also a pair of male / female MC4 connectors are ready crimped on the end of cable so they are ready to go.
Thirdly because this panel also features innovative 5 busbar solar cells it offers better performance as they are better than 2, 3 or 4 busbar solar cells used in most other solar panels.
They extract more power from the same surface area and this results in a smaller overall solar panel. Monocrystalline Solar Panels are also the best choice for applications in warmer climates as they operate well even in high ambient temperatures.
Finally the long-lasting, high-efficiency monocrystalline solar cells and the tough and with an aluminum frame will give you years and years of consistent free power. The waterproof design ensures that the panel can be used in all weather conditions.
Remember If you are planning to use this solar panel to charge a 12V battery or battery bank you will need a Charge Controller Click here to see the range.
250w Solar panel specifications:
- Peak power: 250W
- Maximum power voltage: 20.2V
- Maximum power current: 12.38A
- Open circuit voltage: 23.9V
- Short circuit current: 13.12A
- Power allowance range: +/- 3%
- Dimensions: 139 x 99 x 4 cm
- Weight: 15.3 kg
- 8 mounting holes 9 x 14 mm
- 2 x 5m of high quality single core solar cable (6.0mm cross section)
- Male and female MC4 connectors
30Amp Charge Controller – M Series by PowMr
30amp PWM Charge Controller with MPPT features.
12V or 24V so is ideal if you plan to extend your project.
PowMr are a leading manufacturer of solar solution and offer value for money and with forward thinking technology.
It not only has efficient MPPT controller charging function but is all so able to automatically track the maximum power point.
This makes it 10% -30% higher on the efficiency rating than the ordinary controller.
It has standby energy saving of more than 30% when tested side by side with an ordinary charge controllers.
Finally it has a standby power consumption of only 10mA-15mA.
Key Features 20amp PWM Charge Controller
LCD screen display all the charging data
Easy operation interface
Fully 3-stage PWM charge management
Parameter user can reset
A key to open and close the load
A key to restore the factory settings
USB-5V/0.5A for out put charging
The standby power consumption of only 10mA-15mA
Automatic temperature compensation function
|Parameters / Model||PWM10||PWM20||PWM30||PWM40|
|Maximum power current||12A||20A||30A||40A|
|System load loss||≤13mA|
|Battery float voltage||13.8V(12V system)/27.6V(24V system)|
|Battery (under voltage) protection||10.6V(12V system)/21.2V(24V system)|
|Battery (under voltage) recovery voltage||12.6V(12V system)/25.2V(24V system)|
|Charge mode||MPPT+PWM MODE|
|Humidity requirements||≤90%, No condensation|
|Temperature Probe (built components)||NTC 100K thermistats|
|Maximum open circuit voltage of the solar panel||18V-24V(12V system)36V-48V(24V system)|
|Solar panels maximum open circuit voltage (V)||≤48V|
(Cases) 12V system standard configuration (only applicable to our solar charge controller)
|The peak voltage of the solar cell panel(Maximum power voltage (V)))||18V-25V||18V-25V||18V-25V||18V-25V|
|Peak power of solar cell panel(Maximum power (Wp)||50W-130W||100W-260W||200W-380W||≤500W|
|Solar Charge Controller Model||PWM/MPPT10||PWM/MPPT20||PWM/MPPT30||PWM/MPPT40|
|Battery standard voltage||12V||12V||12V||12V|
|Battery capacity configuration||≥100AH||≥200AH||≥300AH||≥400AH|
Pair of 5m Solar Panel extension cables
This pair of single core solar extension cables is specially designed for solar panels to carry high current and have negligible power loss. It comes with waterproof MC4 connectors (“male” on one lead, “female” on the other lead) which can be easily connected to similar MC4-type connectors coming with most solar panels.
- Conductor: tinned copper
- Cross section: 6.0mm
- Construction (N/mm): 84/0.30
- Conductor (Dia.): 3.17
- Conductor resistance: 3.39 Ohm/km (20C)
- Insulation and Jacket: 120C XLPE
- Working temperature range: -40C to +90C
- Certification: TUV
- Outer diameter: 7.0 mm
7 Part ABS Bracket Kit
7 Part light weight kit. ABS Brackets.
Don’t forget to check on what the United Nations and CP26 say on Solar Energy