200w Monocrystalline Solar Panel
200w Solar Panel Mono, here at Eos Solar Solutions we are now pleased to add this 200w Monocrystalline Solar Panel to our range. Producing a reliable 38.8v at 5.15 amps you can team this up with a 20amp Charge Controller. This is a great 200w Solar Panel Mono
Monocrystalline out performs Polycrystalline every time so if you are looking for efficiency then this is the way to go. Reliable in all weather conditions robust and ready to use.
In order to achieve high output this solar panel uses innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel for the same power rating.
Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection.
The panel comes with an impressive 1m of special PV Solar Cable which can operate at high roof temperatures, with minimum power losses.
A pair of male / female MC4 connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system
The MC4 connectors can also be cut off when wiring to screw terminals of a solar charge controller
Remember to always use a 20 amp Charge Controller, see the Controllers we recommend below.
Solar panel specifications:
- Peak power: 200W
- Maximum power voltage: 38.80V
- Maximum power current: 5.15A
- Open circuit voltage: 45.00V
- Short circuit current: 5.80A
- Power tolerance: 0/+3%
- Dimensions: 132 x 99 x 3.5 cm
- Weight: 15.5 kg
- Mounting holes for installation
- 2 x 1m of high quality single core solar cable 4.0mm² cross section
- Male and female MC4 connectors